Disperator 500 - Excellent Series HK-Models
Disperator food waste disposers are installed in kitchens and galleys to remove food waste immediately from areas where it is produced.
When assembled with an HK mounting assembly, a Disperator 500 Excellent Series food waste disposer can be installed in a table or working top. Unlike the MI assembly, the HK assembly permits continuous feeding of waste into the disposer. The opening into the disposer is partly covered enabling food waste to enter the grinding unit but preventing accidental access to the rotating grinding unit during operation.
The HK mounting assembly has three flushing nozzles mounted on the inside of the cone. These are connected to a solenoid valve and a line strainer. When the disposer is started, the solenoid valve opens allowing water to flush food waste into the grinding unit and out to the wastewater system.
The Disperator 500 Excellent Series has Det Norske Veritas (DNV) Approval for compliance with IMO MARPOL 73/78 ANNEX V for disposal of ground food waste into the open sea.
Food Waste Disposers - 500 Excellent HK-Models
Installation Description - HK-assembly for working tops
Operation Instruction for Food Waste Disposer
Service Instruction for Disperator 500 Excellent Series